Micro plain bearing

TS NO.: TS-036

oem

51726-SNA-013             

51726-SNA-G01

Applicable vehicle Name:

Great Wall - C50

Inner diameter: 70.5 outer diameter: 115 height: 33

The movement state of cylinder is closely related to cylinder diameter, so the main parameter of cylinder diameter is very important. The research shows that the load is 55kg the cylinder load is 539n, so the radial load force F of the cylinder is 539n. The cylinder of this organization is a single effect cylinder, which can be obtained according to the materials. Therefore, the load rate n of the selected cylinder is 0.7.

Therefore, the applied working pressure of cylinder P = 539 × 0.8 = 431.2n can be determined. (P should be lower than 85% of the pressure regulating valve inlet working pressure).

According to the calculation of the front side the main parameters obtained by looking at the material, knowing that f, N P, the European shock absorber bearing supplier can preset the ratio of rod diameter to cylinder diameter D / D = 0.5. According to the calculation method of the theoretical force of the cylinder foundation the calculation method of the load rate, the cylinder diameter D can be selected as 70mm;

the cylinder travel arrangement

When selecting the stroke arrangement of the cylinder, a certain capacity should be reserved, which is conducive to the application in the middle later period. The actual operating distance of the cylinder is 130mm. In order to facilitate the installation adjustment, appropriate capacity should be reserved for the specific fitness exercise of the cylinder. The fitness exercise schedule of the cylinder should be 100.