Shock absorber bearing

TS NO.:TS-062

oem

5035.19                     

5035.23               

9151063380                

54612-1G010      

7700803635                           

96261094                              

54612-2C000 

Applicable vehicle Name:

Citroen - 301307206207308408, c4l, Sega, triumphal, Fukang, 15, Elysee, senna, Picasso, C2, C4

Inner diameter: 65 outer diameter: 100 height: 20

Performance of a pair of double angular contact ball bearings

Paired double angular contact ball bearings are composed of two sets of angular contact ball bearings in different combinations. In addition to the performance characteristics of angular contact ball bearing, it bears larger load, longer service life higher positioning accuracy, especially for the equipment with high requirements for speed stiffness, pairing angular contact ball bearing is a good choice.

2. Structural form

Pairs of double angular contact ball bearings can be divided into the following three types of structure according to the different assembly methods. "Back to back" (o) type DB combination, shock absorber bearing type. This configuration is matched with the wide end face of two bearing outer rings. It can bear the combined load of radial axial load at the same time, can also bear the effect of bidirectional axial load.

Axial load, front shock absorber bearing, but the system stiffness is low. "Series" type, as shown in Figure 3. This configuration is that the wide end face of the outer ring of the two bearings matches the narrow end face, it can only bear a large axial load in a single direction.