Damping plain bearing

TS NO.:TS-042

oem

54325-8J000               

54325-4N000

Applicable vehicle Name:

Nissan - Teana 04-07, Qijun T30, demeanor A23, demeanor A33, Shuaike mpv11-

Inner diameter: 36 outer diameter: 64 height: 13.5

The structure of extensible support point tilting ring thrust ball bearing is that all the annular torsion pads are supported on the butterfly spring with the same height width ratio as the plane bearing principle. With the self adaptability vibration reduction characteristics of the disc spring, all the torsion pads can be fully automatically corrected, Because the rigidity of the oil slick is higher than that of the elastic yellow, the pressure distribution of the torsion pad is even, so the bearing capacity of the torsion pad can be improved.

2. Convenient installation adjustment

The butterfly spring can fill the deviation in the production manufacture, avoid scraping deformation, reduce the requirements of installation precision. The rolling bearing of this series can adjust the mark value of the scale sleeve on the anchor bolt according to the guide bush adjustment, so that a uniform oil floating gap is generated between the guide rolling bearing the torque head, which can prevent the rolling bearing burning, rotating damping vibration other common faults caused by installation. It is much more reliable convenient than the previous work experience sheet metal operation.

3. High temperature resistance

Because of the unique structure of the annular Bush fuel pipe, the temperature of the torsion pad is evenly distributed, the high temperature resistance is up to 80C, which is more than 10C higher than that of the fan type torsion pad.