Suspension bearing

TS NO.:TS-056

oem

51726-STK-A01

Applicable vehicle Name:

Honda CRV 05-12, re2, RE4, RD4, Allison rr8 16-18

Inner diameter: 70 outer diameter: 112 height: 5.5/13

The torque is to remove the clearance of the rolling bearing of the large plain bearing by preloading, so that the rolling bearing has a certain interference, even if the overturning body of the rolling bearing touches part of the inner outer dovetail guide rail, resulting in pre deformation. As a result, the number of forced overturning body of rolling bearing is improved, the bending stiffness, precision life are improved. In general, if the torque is too large the plane bearing is fixed, the rolling bearing's burning capacity will increase, the damage will increase the precision in work will be destroyed. On the contrary, if the torque of the rolling bearing is too small, the vibration resistance, bending stiffness, precision speed of the main shaft bearing will be reduced. Therefore, the rolling bearing should have suitable torque. Preload is divided into three levels: light, medium heavy. In the design scheme, according to different bearing size series total width series, the preload mark value is different (which can be quickly inquired in the rolling bearing sample plate), the customers can press the different

Workload at work selects the preload level. Pressure moment refers to the development torque of elastic yellow elastic sealing ring placed between two rolling bearings bearing with seat. In this kind of torque, the preload increase rate caused by thermal deformation of rolling bearing bearing with seat can be changed to elastic yellow elastic sealing ring. If elastic yellow extensible seal ring is selected properly, its pre load change is big can be ignored.