Plain bearing

TS NO.:TS-059

/

oem

BP4K-34-38XA                  

SKF  BDA1059AB      

1255350                    

1250820                

3M51-3K0-99AD                       

30666530                  

11508111                 

1223835                          

BBM2-34-38X                

3M513K155BE/

Applicable vehicle Name:

Mazda - m3, M5, starch/

Inner diameter: 35.5 outer diameter: 107 height: 44/

Characteristics of 10% double angular contact ball bearings paired double angular contact ball bearings are composed of plane bearing maintenance two angular contact ball bearings in different combination methods. In addition to the characteristics of the angular contact ball bearing, it bears larger load, longer service life higher precision level. It is very suitable for machine equipment with high speed ratio bending stiffness. Bearing surface grinder is a good choice for double angle contact ball bearings.

According to the different assembly methods, the paired double angle contact ball bearings can be divided into the following three types of structure. "Back to back" (o) DB combination, as shown in Figure 1. This kind of equipment is matched with the outer wide inner hole of the two rolling bearings. It can bear the radial radial load as well as the synergistic load as well as the bidirectional radial load. But the bending stiffness of the system software is low. The "serial" type is shown in Figure 3. This kind of equipment is equipped with two outer rings of rolling bearings with wide bore narrow bore. It can only bear very large radial load in a single direction.