Macpherson suspension bearing

TS NO.:TS-087

oem

54325-4M400             

30875399                   

54320-50Y12         

MR316535            

MR297932                               

54325-9V500

Applicable vehicle Name:

Nissan - style, sunshine

Mitsubishi Lanser, Lingshuai

Inner diameter: 30 outer diameter: 55 height: 8.5

Part of mechanical equipment

The vibration reduction system consists of two parts, i.e. the upper part the lower part. Each vibration system software is composed of upper lower swing arm, middle lower swing arm, lower arm, supporting cabinet table, exciting spring yellow, driving motor, energy storage flywheel inductor, etc. The end of the inductor is fixed on the shell the other end is fixed on the surface of the table.

Schematic diagram of single support structure of common shock absorber test station

1-supporting cabinet table; 2-upper lower swing arm; 3-middle lower swing arm; 4-lower swing arm; 5-vibration spring yellow; 6-drive Shenji; 7-axial force inertial force structure upper lower arm, middle lower arm lower arm are installed on the shell according to three lower arm shafts six bearings. The upper lower arm the lower arm are connected with the supporting cabinet table, form a parallelogram four-bar linkage mechanism, bearing plane bearing to ensure that the left right fitness movement should be parallel to the plane, the cabinet table can be kept at a constant level under load. The middle of the middle lower arm the top of the lower arm is equipped with a spring yellow. One end of the drive motor is equipped with an energy storage water pump flywheel, the other end is equipped with a boss, on which there is a camshaft. One end of the connecting rod is connected with the camshaft according to the rolling bearing, the other end is connected with the top end of the lower swing arm.