What are the common automotive flat bearing failures and maintenance methods?

The automobile plane bearing is one of the important parts in the automobile transmission system, and its stability is directly related to the safety and performance of the automobile. Common automotive flat bearing failures are as follows:

Wear: Due to long-term use and friction, the parts inside the flat bearing will wear, resulting in bearing failure. The bearing with serious wear will give out abnormal noise, jitter and other fault manifestations.

Insufficient lubrication: plane bearings need adequate lubrication when working, otherwise they will generate heat due to friction, causing the bearing to overheat and damage.

Impurities into: If the automobile plane bearing manufacturing in the disassembly, installation or maintenance process does not pay attention to cleaning, it is easy to let impurities into the bearing interior, and then lead to bearing damage.

Improper installation: the bearing is not firmly installed or the installation position is incorrect, which is easy to lead to failure.

Maintenance of automotive flat bearings usually requires the following steps:

Inspection: First of all, check the bearing to see if there is obvious wear, abnormal sound or impurities into the situation.

Cleaning: Cleaning is an important step in the maintenance of bearings, to ensure that there are no impurities inside the bearing.

Lubrication: After cleaning, the bearing needs to be lubricated to ensure smooth operation.

Replacement: If the bearing is seriously damaged and cannot be repaired, a new bearing needs to be replaced.

Installation: After replacing the new bearing, the special type of automobile plane bearing should be correctly installed to ensure its stability and normal operation.

In general, the maintenance method of automotive flat bearing failure is mainly inspection, cleaning, lubrication, replacement and installation steps, only seriously treat the maintenance of flat bearings, in order to extend the service life of the bearing, to ensure the safety and performance of the car.