Plain bearing

TS NO.:TS-084

oem

8200824774             

8200106131        

8200485734        

8200222463B        

7701208891  

Applicable vehicle Name:

Dongfeng - popular Jingyi B11, Jingyi XL 2007.10-2012

Byd-s8

Reno megana 2, landscape 2

Inner diameter: 90.5 outer diameter: 139 height: 22.5/44

1. Maintain the rolling bearing surrounding cleaning.

Even small floating dust, which can't be seen by both eyes, can also cause damage to Timken rolling bearing. Therefore, the shock absorber bearing chip should maintain the surrounding cleaning, so that the floating dust will invade the plane bearing.

2. Careful application of rolling bearing gives Timken rolling bearing obvious impact in application. The sharp front shock absorber bearing will cause scar imprint, which will become the cause of safety accident.

In serious cases, there will be cracks cracks, so be careful.

3. Apply appropriate special tools for practical operation

To prevent the replacement of the current special tools, it is necessary to apply the appropriate special tools.

4. Pay attention to the rust of plain bearing

When operating the rolling bearing, the sweat in the hand will become rusty. Pay attention to the actual operation with clean hands carry rubber gloves as much as possible.

When operating the rolling bearing, the sweat in the hand will become rusty. Pay attention to the actual operation with clean hands carry rubber gloves as much as possible.

It is very important to understand that the operation method of Timken rolling bearing may have practical effect with twice the effort.

When the mechanical parts around the rolling bearing have been lubricated by oil for a long time the heat must be removed by grease, the rolling bearing should be lubricated with oil. When the rolling bearing is under heavy load high-speed rotation, there is external heat transfer, there will be provisions for heat removal.

A small amount of moistening methods, such as oil leakage lubrication, welding fume lubrication gas lubrication, can ensure that the oil stirring damage rolling bearing friction are large.

When gas is used as a medium, the oil can be provided immediately the cyclone can be beneficial to sealing.

In areas the speed ratio of plain bearing is very high the cooling effect must be excellent, a lot of grease can be sprayed into the whole surface immediately.