Damping plain bearing

TS NO.:TS-162

oem

MR594349

L208-34-38X

Applicable vehicle Name:

Mitsubishi grandi

Inner diameter: 32 outer diameter: 70.5 height: 10

The cylinder is located in the middle of the triangle spring. As an intermediate shaft, the cylinder only plays a supporting role, but also ensures that the machine itself will shift left right when the spring is compressed, thus ensuring the stability of the machine movement. The mechanism adopts a single acting cylinder, because the load on the machine will affect the motion of the machine itself, so when designing the shock absorption mechanism, it should be considered that it can only reduce the vibration, but also can increase the motion load of the machine itself. Therefore, after screening, the single acting cylinder is selected because of its simple structure, low air consumption, light weight easy installation replacement. The internal structure of the single acting cylinder is also relatively simple. The spring is installed in the cylinder body of the single acting cylinder, which reduces the hand condition of the single acting cylinder when it is working, greatly shortens the life of the plane bearing the effective stroke of the single acting cylinder. Another good point is that the reaction force of the spring increases with the increase of the compression stroke, so the output force of the piston rod decreases with the increase of the movement stroke. The internal spring has the ability of absorbing kinetic energy, which can reduce the impact of the end of travel. In this way, the internal spring the external spring complement each other to control the vibration of the whole machine when moving.